DECT ULE TMP Temperature Detector (Coming Soon)

The DECT ULE TMP is a Do-It-Yourself fully supervised low-current Temperature detector. It is part of the DECT ULE wireless line of devices embedding an advanced DECT ULE RF transceiver. Temperature sensor on one side and a cable with suitable connector on the other side allow the detection of temperature in two locations using a single device. The DECT ULE TMP uses smart message control verifying all messages are successfully transmitted to the base station.


Modulation Type DECT Standard
Frequency Band All DECT Bands
Event Transmission Alarm, Tamper, Low Bat, Keep Alive (every 7 minutes – configurable)
Detection Method Two Temperature sensors – Internal & External (optional).
Range 500 meters (Open Space)
Battery Lithium. 3V Type: CR123A, Size: 2/3A
Battery life expectancy Up to 4 years on regular use
Current Consumption Standby: 4µA ,Average: 19µA
Transmit power Tx Power at +22dBm, typical and Rx Sensitivity at -97dBm, typical
Tamper Switch Front Cover Removal & Back Tamper
LED Indicators Red LED: ON during alarm, Green LED: Pair Status
Operating Temperature -10°C – +50°C (14°F– 122°F)
Dimensions 97 mm x 22 mm x 21 mm
Weight (incl. battery) 56 gr
Compliance CE, FCC Part 15, IC, ETL & ULE

Declaration of Conformity

Installation Instructions